logo

Free Shipping

on all orders over $149

truck_

Free Shipping on all orders over $149​

Knowledge Base

FX Luxor Firmware Updates

Firmware updates are occasionally released to add features or enhance the Luxor functionality. To update the facepack, chassis, Wi-Fi module, and flash firmware on the Luxor, an SD card is required to transfer the data from a computer to the facepack.

STEP ONE: Go to the FX Luminaire website (fxl.com) and navigate to the Luxor product page. The firmware update files are located under the Documents tab.

STEP TWO: Save the desired firmware onto an SD card.

Image courtesy of hunter industries

STEP THREE: Remove the facepack from the chassis by pulling on the tab to the right of the facepack and swinging the facepack door open.

STEP FOUR: Pull the black tab outward, while simultaneously pushing the facepack through the door carriage.

Image courtesy of hunter industries

STEP FIVE: Insert the SD card with the pins facing the front of the facepack, pressing completely inward and then release to lock card into place.

Image courtesy of hunter industries

STEP SIX: From the Home screen, select Setup. Navigate to the Firmware tab and press scroll wheel.

Image courtesy of hunter industries

STEP SEVEN: Select the Firmware Type that will be updated.

STEP EIGHT: Once the designed type is selected, navigate to Update and press the scroll wheel. The facepack and flash update processes usually take between 5 and 15 seconds, chassis updates typically take a couple of minutes, and fixture updates can take up to 15 minutes.

 

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.