This instrument can operate and program ICD and DUAL decoders via wireless induction, through the base of the decoder with a programming cup. This allows access to installed decoders, without removing waterproof wire connectors.
ICD-HP can also be used for initial setup of new decoders. The included power leads will power a decoder for programming purposes, for installation later.
ICD-HP can be used for diagnostic operation and testing of installed decoders, solenoids, and even sensors. ICD-HP can enable new programming options for ICD and DUAL decoders. It can program any station numbers in any order within a multi-station decoder and can “skip” stations to reserve them for future use.
Note: The ICD-HP would need version 1.03 or higher to be compatible with DUAL decoders.
HUNTER DUAL TWO-WIRE INSTALLATION: Programming with the ICD-HP Handheld Programmer
Video 8 of 8 of installation of the Hunter Dual decoder two-wire system with I-Core controller. Programming with the ICD-HP handheld programmer.