logo

Free Shipping

on all orders over $149

truck_

Free Shipping on all orders over $149​

Knowledge Base

How to Set Hunter Node Master Valve Operation

(NODE-200, NODE-400, & NODE-600 only)

The multi station NODE models (NODE-200, NODE-400, and NODE-600) are capable of being programmed with the use of a normally closed master valve. When programming with the master valve you will be assigning station 1 as the master valve, effectively losing the use of station 1 for activation of an irrigation station.

  1. From the Idle Mode, press the ENTER button until the ICON1 icon is displayed.
  2. Program A will be displayed along with the active station # on the lower left. Make sure the active station showing is #1. The run time for station #1 will be shown.

    node_programming_17
    Image courtesy of hunter industries
  3. Press the minus (-) button until the run time displayed disappears and the MV icon displays on the top screen. Station 1 is now acting as the master valve and will not be available in other programming screens.

    node_programming_18
    Image courtesy of hunter industries
  4. When the master valve is activated it will apply to all programs and the MV icon will stay displayed on the screen at all times.

 

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.