How to Set up Hunter ACC2 Conditional Response
Dial to Advanced Settings and select Conditional Response. Each response has a soft key for the “If” condition, a “Then” …
Dial to Advanced Settings and select Conditional Response. Each response has a soft key for the “If” condition, a “Then” …
SOS (STATUS OUTPUT STATION) An SOS is a dedicated station output that is only used with Conditional Response. The purpose …
SOS (STATUS OUTPUT STATION) An SOS is a dedicated station output that is only used with Conditional Response. The purpose …
Conditional Responses allow a sensor or condition to trigger something to happen. This can be as simple as telling a …
A MainSafe is an optional level of flow monitoring and protection above the Flow Zone level. It is especially useful …
Flow Manager runs simultaneous stations to reach a programmable flow rate target. It allows the controller to decide which stations …
When stations are running, the Flow Monitor continuously checks the actual flow from the sensor(s) against the combined learned flow …
The Flow Monitor requires the following information to operate correctly: Install and set up a flow sensor (Devices menu). Install …
The two major parts of Flow Operations are the Flow Manager, and the Flow Monitor. Checking either will display a …
The flow menu includes all setup for the various flow functions. These are described in detail in the Flow Operations section. CLEAR …