Hunter Wireless Flow Sensor Specifications
Operating Specifications Temperature Pressures Humidity 0 to 140ºF/60ºC up to 200 psi/13.7 bar up to 100% Flow Range Flow-Sync Sensor …
Operating Specifications Temperature Pressures Humidity 0 to 140ºF/60ºC up to 200 psi/13.7 bar up to 100% Flow Range Flow-Sync Sensor …
Problem Cause Solution WFS not reading. Water shut off. Verify that no isolation valves are closed and that the water …
Flow sensors can potentially be damaged by winterization blow-out techniques and should be removed prior to injecting compressed air into …
WORKING WITH WFS Hunter flow-capable controllers are designed to measure and record actual flow, shut off irrigation when a high …
When flow is occurring the sensor/transmitter will transmit sensor information at a maximum rate (depending on flow) of once every …
After applying power to either the sensor/transmitter or receiver, wait a minimum of 10 seconds for the power-up sequence to …
Read moreHow to Pair the Hunter Wireless Flow Sensor and Receiver
The FCT tee fitting comes with a plug that allows for installation of the FCT into the irrigation system prior …
Read moreHow to Install Hunter Wireless Flow Sensor into the FCT Fitting
Legend: Hunter Wireless Flow Sensor and transmitter (WFS) Irrigation valve box per plan heat stamp lid with “FS” in Letters …
The WFS sensor is designed to install within an FCT tee fitting. See chart below for tee sizes and corresponding …